8
SPARE PARTS LIST:
1. Firebricks: (9) x 234mm x 118mm x 40mm
2. Bae Plate: Steel 440mm x 250mm x 6mm
3. Brick Retainer: Steel 410mm x 345mm
4. Glass Seal: 1080mm x 8mm x 3mm
5. Glass: 333mm x 195mm x 5mm Pyro Ceramic Glass
6. Door Rope: 900mm x 13mm round braided ceramic rope
WARRANTY
Pecan Engineering Pty. Ltd. warrants this stove to be able to operate under normal use and service and within 10 years from the
date of the original purchase on the terms herein shall repair or replace without cost to the original customer any part thereof
which shall be returned to our factory, transportaon charges prepaid and which our inspecon shows would prevent operaon.
This warranty does not apply to rebricks, brick retainer, bae, door seal, glass, nor discolouraon of the surface or tarnishing of
chrome ngs all of which require normal service to maintain them.
Under the terms of this warranty, Pecan Engineering Pty. Ltd. assumes no responsibility for the labour costs involved in removing
or replacing the stove. Nor shall Pecan Engineering Pty. Ltd. be liable for any injury, loss, or damage (direct, indirect or conse-
quenal) arising out of the use or inability to use the product, or its removal and replacement. All other stove warranes, ex-
pressed or implied are excluded to the extent possible to law. Any claims against Pecan Engineering Pty. Ltd. must be brought
within Australian Jurisdicon.
The Retailer does not have the authority to alter this warranty.
MANUFACTURER NAME & ADDRESS:
Pecan Engineering Pty. Ltd.
13 Acorn Road
Dry Creek
South Australia, 5094
To Previous Page
Loading...
