Nedap Invexs MND190 User Manual

11 April 2011 Version 9
This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys
no licence under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifica-
tions and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in
whole or in part, without the written consent of the publisher.
© Nedap N.V., IDEAS P.O. Box 103 NL-7140 AC GROENLO The Netherlands
Page 1 of 21
Nedap Readers Convexs & Invexs
Installation Guide and User Manual
®
1
2
3
4
5
6
7
8
9
C
0
E
1
2
3
4
5
6
7
8
9
C
0
E

Nedap Invexs MND190 Specifications

General

Model	MND190
Type	Card Reader
Power Supply	12-24 VDC
Weight	150 g
Operating frequency	13.56 MHz
Ingress protection	IP65
Technology	RFID
Communication Interface	Wiegand
Supported transponders	ISO14443A
Housing	Polycarbonate

Summary

3. Reader Output Protocols

3.1. RS485NR Protocol

Covers RS485NR protocol for bi-directional encrypted communication.

3.3. Wiegand Protocol Details

Covers Wiegand protocols, formats, timing, and bit lengths.

3.4. Serial RS485 Ascii Protocol

Covers RS485 Ascii serial protocol for third-party systems.

4. Reader Connections

4.1. Convexs Connections

Details physical connections for Convexs readers.

4.2. Invexs 170 Connections

Outlines physical connections for Invexs 170 readers.

4.3. Invexs 190 Connections

Lists wire colours and functions for Invexs 190 connections.

4.4. RS485 Connections

4.5. RF Output Connections

4.6. Wiegand Connections

7. Reader Configuration

7.1. Configuration Files

Details how to upload configuration files using AEmon or AEreco.

7.2. Configuration Cards

Explains the use of configuration cards for reader setup.

8. Firmware Updates

11. Known Problems