Nedap Invexs MND170 User Manual

11 April 2011 Version 9
This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys
no licence under any patent or other right, nor does the publisher assume liability for any consequence of its use; specifica-
tions and availability of goods mentioned in it are subject to change without notice; it is not to be reproduced in any way, in
whole or in part, without the written consent of the publisher.
© Nedap N.V., IDEAS P.O. Box 103 NL-7140 AC GROENLO The Netherlands
Page 1 of 21
Nedap Readers Convexs & Invexs
Installation Guide and User Manual
®
1
2
3
4
5
6
7
8
9
C
0
E
1
2
3
4
5
6
7
8
9
C
0
E

Nedap Invexs MND170 Specifications

General

Frequency	13.56 MHz
Technology	RFID
Material	ABS
Supported Cards	MIFARE Classic, MIFARE DESFire
Interface	Wiegand
Housing	ABS

Summary

Cards read by Convexs/Invexs

Mifare cards

Convexs/Invexs Protocols

RS485NR (including RS485NR2)

Details the RS485NR protocol for bidirectional communication with AEpacks.

RF output

Explains RF output options for connecting to former Nedap XS readers or AEpacks.

Wiegand

Covers Wiegand protocols for third-party system integration, including formats and timing.

Serial RS485 (RS485 Ascii)

Details the RS485 Ascii protocol for serial connection to third-party systems.

Convexs/Invexs connections

Convexs Connections

Invexs 170 Connections

Invexs 190 Connections

Connections using RS485

Provides wiring diagrams and pin assignments for connecting Convexs/Invexs via RS485.

Connections using RF output

Provides wiring diagrams and pin assignments for connecting Convexs/Invexs via RF output.

Wiegand

Convexs/Invexs LED and Beeper control

Configuring the Convexs/Invexs

Nedap reader Configuration file

Details how to upload configuration files using AEmon or AEreco.

Configuration card

Explains the use of configuration cards for setting up Convexs/Invexs readers.

Updating firmware of the Convexs/Invexs

Default settings of the Convexs/Invexs

Available reader firmware

Known problems

Convexs/Invexs to AP1002

Addresses a known issue with AP1002 regarding transmitter level adjustment.

Convexs/Invexs to Nedap readers with AM badges

Convexs/Invexs to AP4003 using RS485

Convexs/Invexs to AP4003 using RS485 Tamperswith / PIN

Convexs/Invexs to AP4x03X series before production code W2 using RS485