Need help?Do you have a question about the Nedap NVITE and is the answer not in the manual?
General| Technology | RFID |
|---|---|
| Frequency | 13.56 MHz |
| Ingress Protection | IP65 |
| Power Supply | 5 - 24 V DC |
| Supported Standards | ISO14443A, ISO14443B, ISO15693 |
| Interface | Wiegand |
| Housing Material | PC |
Overview of the NVITE reader, its capabilities and intended use in identification systems.
Details on available firmware versions, including STANDARD and OSDP, and their key features.
Essential safety precautions for installing and servicing the NVITE reader.
Guidance on how to physically mount the NVITE reader using its dimensions and provided hardware.
Information on connecting the NVITE reader to a DC power supply, including voltage and current ratings.
Details on configuring and using the RS485 communication interface for the NVITE reader.
Instructions for connecting and installing drivers for the NVITE reader's USB interface for service and updates.
Configuration and timing details for the Wiegand communication interface on the NVITE reader.
Details on configuring and timing for the Magstripe ISO7811/2 interface on the NVITE reader.
Description of the NVITE reader's digital inputs, their connections, and usage with different firmware.
Details on the NVITE reader's digital outputs, their types, ratings, and firmware-dependent functionality.
Information on the NVITE reader's tamper switch, its connections, ratings, and reporting mechanism.
Guide to connecting the NVITE reader to Nedap access control hardware via the antenna interface.
Overview of the NVITE configuration software, its download, and initial connection steps.
Access to various reader configuration options within the software interface, including mode, saving, and reset.
General configuration parameters for the NVITE reader, including hold time, passwords, customer codes, and heater.
Configuration for supported card types including BLE, NFC, QR-code, DESFIRE, MIFARE, and LEGIC.
Defining and configuring data output formats for serial, Wiegand, and Magstripe interfaces.
Procedures for firmware updates and key updates, including OSDP firmware change and BLE/NFC masterkey updates.
To Next Page
