Nedap Cube Card Reader 190 User Manual

Date: 08 April 2013 Version: B
This information is furnished for guidance, and with no guarantee as to its accuracy or completeness; its publication conveys no licence under any patent or other
right, nor does the publisher assume liability for any conse
quence of its use; specifications and availability of goods mentioned in it are subject to change without
Part.no.: 9209735
Cube Card Reader 190
Nedap Mifare readers
GENERAL
The Cube card reader 190 series is capable of reading Mifare and DESFire
credentials due to its dual reader technology. The Cube card reader 190 is
designed to be used on door pillars (mullion) and suitable for outside and
inside use. A model with keypad is also available.
Functionality and output is determined by the configuration of the Cube card
reader. The configuration is defined using the programm AEmon, and
deployed via AEmon.
Three LEDs (red, green, blue) and beeper are included. LEDs around the
keypad ciphers light up only in case a PIN code is requested.
The pigtail cable can be lead directly backwards.
DIMENSIONS
MOUNTING PROCEDURE 190
For mounting the Cube card reader 190, the mounting plate must be placed
on the wall first.
For removing the mounting plate from the Cube card reader 190, unscrew
the screw (1) (Torx, M5) at the bottom of the Cube card reader 190 and push
the Cube card reader 190 slightly up (2). The plate can be mounted using the
4 holes .
Place the cable to the correct position and replace the Cube card reader 190.
®
Install manual
Dimensions: 7.52 x 2 x 1.2 in.
4 mounting holes available at 1.26 x 6.1in
Cable pigtail: 10 x 26AWG shielded, 10 ft
Optional spacer (max thickness 0.4 in) is
available for other cable outlet (top or
bottom)
Un screw
Push up
2
1
Mounting
plate
1
191
30
10 x 26AWG
Shield
32
155
12
40
14.5
50
4 x 5
75
Note: drawing dimensions are in mm

Nedap Cube Card Reader 190 Specifications

General

Connectivity	Wired
Power Supply	12-24 VDC
Model	Cube Card Reader 190
Type	Reader
Technology	RFID
Connection	Wiegand
Interface	Wiegand
Operating Temperature	-20°C
Supported card types	MIFARE, HID

Summary

Cube Card Reader 190 General Information

Product Dimensions and Mounting

Details physical measurements, mounting holes, and cable routing options for the Cube card reader.

Mounting Procedure

Step-by-step instructions for securely installing the reader using its mounting plate.

Cube Card Reader 190 Connections and Indicators

Wire Connections

Details the wire color, function, and pin assignment for connecting the Cube card reader.

Internal LED Indicators

Explains the function of the blue (Status) and green (Identification) LEDs visible from the back.

Cube Card Reader 190 Front Indicators and Firmware

Front LED Indicators

Describes the function of the front three-color LED based on configuration and status.

Firmware and System Configuration

Discusses firmware importance and connecting the reader to Cube Core/Access Plus systems.

Cube Card Reader 190 Specifications and Certifications

FCC and IC Certifications

Compliance statements for FCC and Industry Canada regarding radio frequency emissions.

Technical Specifications

Details dimensions, protection rating, power supply, consumption, environment, and communication.

Cable Specifications

Details wire gauge, shielding, and maximum cable lengths for RS485 and power connections.