31
3. Make sure that the screen is at
least +15 °C, as the adhesive
pads do not work correctly at
lower temperatures. If neces-
sary, heat the windscreen using
the vehicle’s fan or (very care-
fully) with a hair-dryer.
4. Remove the protecve lm
from the 4 adhesive pads and
press the parking disc rmly
against the windscreen for
about 30 seconds. Do not press
against the middle of the back.
Then check from the outside
that all 4 adhesive pads are
scking to the screen well.
5. Your PARK LITE is now in-
stalled and ready for use.
To Next Page
Loading...
