Needit Park Lite - Fitting the PARK LITE; Installation Procedure

30
Fing the PARK LITE
1. On the front right corner of the
inside of the windscreen (this is
a statutory requirement), nd a
spot where all 4 adhesive pads
are in contact with the screen.
When you do so, make sure that
all the buons on the back of
the clock are accessible and you
can easily change the baery.
2. Clean the inside of the wind-
screen in the area you have
planned for the parking disc
with a damp cloth and a lile
washing-up liquid. Wipe the
disc dry and then use the clean-
ing cloth supplied to make sure
the area is completely clean.
(Use only the cleaning cloth
provided for this - no other
detergents.)