EasyManua.ls Logo

Neen Peritone - Average Release and Filter Response

Neen Peritone
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PERITONE Instruction Manual - GB
16
5. RLS - Average Release: The average time taken, after the REST
prompt to reach 37.5% of the previous third second of work
or as in item 4 above, the second second if only 2 seconds of
work has been selected. As in the case of Onset, if any Release
of the trials is more than 2 seconds then it (or they) will be
rejected and the display will indicate the average of only those
which were 2 seconds or less but a dash (-) before the number
displayed will indicate this rejection.
6. If all the Releases were more than 2 seconds then the display
will read AB2.
AMPLITUDE
WIDE
FREQ
19-375 Hz
100-375 Hz
0db
18 50 100200 Hz
50 Hz NOTCH (Except Canada, 60 Hz NOTCH)
-3db 45-58 Hz (WIDE)
370 Hz
-3db
-33db
NARROW
WIDE AND NARROW FILTER SETTINGS
FREQUENCY RESPONSE