NEEWER PL60C - Installation Instructions

EN
※ Light stand is used purely for illustration and is sold separately.
07
③ Adjust the angle of the
light and secure the
U-shaped bracket by
turning the screw knob
clockwise.
Place barndoors on the
light fixture as shown in the
image so it aligns with the
designated slots. Press
down firmly to lock the
barndoors into position.
① Install barndoors
Method 2: Power with a V-mount battery. Insert one end of the D-Tap to
DC cable into the power input jack and the other end into the V-mount
battery. Move the power switch to the ON position, and will appear
on the screen.
Method 1: Power the light using the supplied power adapter. Insert
one end of the power adapter into the power input jack and the other
end into the wall socket. Move the power switch into the ON position,
and will appear on the screen.
※When unplugging the power cord, you need to press the metal button
down to unplug it.
※ The D-Tap to DC cable is sold separately.
Installation Instructions Operating Instructions
② Install light stand
Secure the U-shaped
bracket on the top of the
light stand and lock it with
the stand mount lock.
Some of our supports can
be used in vertical and
horizontal positions via the
corresponding holes.
Vorischtshinweise