en Appliance door
28
5.
WARNING‒Risk of injury!
If the door locks are unsecured, the appliance door
may become detached.
▶ After attaching the appliance door, close the left-
and right-hand door locks.
Hold the screwdriver horizontally and use it to
push the door lock (black component) on each side
of the door downwards as far as it will go .
a The door lock is closed.
19.3 Removing the door panes
To facilitate cleaning, you can remove the door pane.
WARNING‒Risk of injury!
Components inside the appliance door may have sharp
edges.
▶ Wear protective gloves.
Requirement:The appliance door is detached.
1.
Lay the appliance door with the front side facing
down on a flat surface that is soft and clean.
2.
Undo and remove the left- and right-hand screws on
the appliance door.
3.
Carefully lift the inner pane upwards at an angle
and remove the holder .
4.
Carefully lift the inner pane upwards at an angle and
remove it in the direction of the arrow .
5.
Push down on the intermediate pane lightly around
, and carefully lift the retainer until you are able
to pull it out.
6.
Lift the first and second intermediate panes from be-
low and remove them in the direction of the arrow
.
7.
Remove the spacers and seals for cleaning, if
required.