11
Notes
■ When you press a button, the selected power lights up.
■ The microwave power can be set to 1000 watts for a
maximum of 30 minutes. With all other power settings a
maximum cooking time of 1 hour 30 minutes is possible.
Setting the microwave
Example: microwave power 600 W, cooking time 15 minutes
1. Press the operating mode selector.
“Appliance is ready for use” appears on the text display.
2. Press the button for the microwave power setting you require.
The button lights up and
‚.‹‹minutes appears as the
suggested figure on the clock display.
3. Set the cooking time using the rotary selector.
4. Press the ƒ button.
Appliance operation begins. The cooking time starts counting
down.
The cooking time has elapsed
A signal sounds. Microwave operation has finished. You can
stop the audible signal by pressing the
à button. Switch off or
reset the appliance.
Changing the cooking time
This can be done at any time. Change the cooking time using
the rotary selector.
Changing the microwave power setting
Press the button for the new microwave power setting. Use the
rotary selector to set the cooking time and restart.
Opening the oven door during cooking
Operation is suspended.
ƒ flashes. After closing the door,
press the
ƒ button. The programme will then continue.
Pausing operation
Press the
„ button briefly. ƒ flashes. The oven is paused.
Press the
ƒ button again, operation continues.
Cancelling operation
Press the
„ button twice, or press and hold the „ button, until
the “Appliance is ready for use” heading appears. You can now
change the settings.
Note: If you open the appliance door during cooking, the fan
may continue to run.
Combination
This involves the simultaneous operation of another operating
mode with the microwave. Using the microwave makes your
meals ready more quickly, and still browns them nicely.
You can set a cooking time of up to 1 hour 30 minutes.
In this section, you can read about
■ which operating modes and microwave power settings are
suitable
■ how to set combination mode
Suitable operating modes
■ 3 Hot air
■ 2 Hot air plus
■ % Top/bottom heat
■ 4 Circo-roasting
■ + Full-surface grill
■ ( Grill, small
Note: Rapid heat up cannot be switched on in combination
mode.
Suitable microwave power settings
All microwave power settings, except for 1000 watts, can be
combined with an operating mode.
Setting a combination
Example: microwave 360 W, 17 minutes and % Top/bottom
heat 200 °C.
1. Turn the operating mode selector until % Top/bottom heat
appears on the text display.
The temperature display suggests 180 °C.
2. Set the temperature selector to 200 °C.
3. Press the button for the microwave power setting you require.
The clock display shows
‚†:‹‹ mins and the x symbol.
4. Set the cooking time using the rotary selector.
5. Press the ƒ button.
Appliance operation begins. The cooking time starts counting
down.
The cooking time has elapsed
A signal sounds. Combination operation has finished. You can
stop the audible signal by pressing the
à button. Switch off or
reset the appliance.
Changing the temperature or grill setting
This can be done at any time. Turn the rotary selector to
change the temperature or grill setting.
Changing the microwave power setting
Press the button for the new microwave power setting. Use the
rotary selector to set the cooking time and restart.
Opening the oven door during cooking
Operation is suspended.
ƒ flashes. After closing the door,
press the
ƒ button. The programme will then continue.
Pausing operation
Press the
„ button briefly. ƒ flashes. The oven is paused.
Press the
ƒ button again, operation continues.
Cancelling operation
Press the
„ button twice, or press and hold the „ button, and
switch off using the operating mode selector.
Note: If you also enter an end time, the operation which you
have set will switch on and off automatically. See the section
Electronic clock.
To Next Page
Loading...
Need help?
General
