en Familiarising yourself with your appliance
6
5 Familiarising yourself with your appliance
5.1 Controls
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
Switch the appliance on or off
Increase the fan setting
Decrease the fan setting
Switch the lighting on or off
6 Basic operation
6.1 Switching on the appliance
1.
Pull out the filter pull-out.
2.
Press .
a The appliance starts at fan setting2.
6.2 Switching off the appliance
1.
Press .
2.
Slide in the filter pull-out.
6.3 Selecting a fan setting
▶
Press or .
6.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
▶
Press repeatedly until all of the LEDs in the dis-
play light up.
a After approx. six minutes, the appliance automatic-
ally switches to a lower fan setting.
6.5 Switching off intensive mode
▶
To select a fan setting of your choice, press .
6.6 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
Requirement:The appliance is switched on.
▶
Slide in the filter pull-out.
a The appliance switches off automatically after ap-
prox. 10 minutes.
6.7 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
▶
Press .
To Next Page
Loading...
Need help?
General
