NEFF S series User Manual

Rinse aid system en
33
Adding rinse aid
If the display shows "Please add
rinse aid. ", add rinse aid. Only use
rinse aid for domestic dishwashers.
1. Press the catch on the lid of the
dispenser for rinse aid and lift
⁠.
1
2
2. Add rinse aid up to the max mark.
max
3. If rinse aid spills out, remove it
from the tub.
Spilled rinse aid can cause ex-
cessive frothing during the wash
cycle.
4. Close the lid of the dispenser for
rinse aid.
a The lid clicks into position.
Setting the amount of rinse
aid
If there are streaks or water marks on
tableware, change the amount of
rinse aid.
1. To open the basic settings, press
for approx. 3seconds.
2.
Press repeatedly until the display
shows "Rinse aid dispenser".
3.
Press or repeatedly until the
right amount of rinse aid has been
set.
The value 5 is set at the factory.
– A low setting adds less rinse aid
during the wash cycle and re-
duces streaking on tableware.
– A higher setting adds more
rinse aid during the wash cycle,
reduces water marks and im-
proves the drying result.
4.
To save the settings, press for
approx. 3seconds.
Switching rinse aid system off
If you find the rinse aid refill indicator
irritating, e.g. when using combined
detergents with a rinse aid compon-
ent, you can switch the rinse aid sys-
tem off.
Tip:The function of rinse aid is lim-
ited with combined detergents. You
will generally get better results using
rinse aid.
1. To open the basic settings, press
for approx. 3seconds.
2.
Press repeatedly until the display
shows "Rinse aid dispenser".
3.
Press or repeatedly until the
display shows the amount of rinse
aid as 0.

NEFF S series Specifications

General

Brand	NEFF
Model	S series
Category	Dishwasher
Language	English