26
Transferring settings
Short-term memory
As soon as you lift the cookware or move it on the cooktop, all
settings of the cooking position are saved for a short time (10-
90 seconds). The cooking position does not heat.
Note: For the duration of the short-term memory, you can
change the settings of the cooking position (exception:
powerBoost function and timer).
Place the cookware back onto the same position within the
duration of the short-term memory. The settings are
automatically applied. The cooking position heats up.
Notes
■ If the position differs significantly from the original position,
use the transfer function
■ To find out how to change the duration of the short-term
memory, see section Options menu.
Transfer function
With this function, you can transfer the settings of one hotplate
to another cooking position.
1. Place the cookware at another position on the cooking
surface within the duration of the short-term memory. The
new hotplate is detected.
Note: The transfer function is no longer available if you:
■ make a setting in the meantime (exception: settings on the
hotplate with short-term memory)
■ move the cookware again
2. Touch the ˆ transfer symbol. The settings have been
transferred.
Clock
Setting the clock
The hob must be switched on.
1. Touch the > symbol. The Options menu is displayed.
2. Slide your finger up or down and select the option “Clock”.
The set time appears in the display.
3. Select the time format (hours or minutes) and set the clock
with the scroll function.
4. Touch the Ñ display area at the bottom right. The clock is
set.
Wipe protection
If you wipe over the display while the hob is switched on,
settings may be altered. To prevent this from happening, your
hob has a wipe protection function.
To switch on: touch the
"symbol. A signal sounds. The display
is locked for 20 seconds. The remaining cooking time appears
in the display. You can now wipe over the display without
altering any settings.
Switching off: in order to switch off the wipe protection function
before the time elapses, touch the "symbol and then the
“switch off” display area.
Note: The main switch is excluded from the wipe protection
function. You can switch off the hob at any time.
To Next Page
Loading...
Need help?
General
