7
Before Using Your Appliance for the First Time
Time of day
❑ Before you use your appliance for the
first time, it is necessary to set the
current time on the electronic timer.
❑ After connecting to the mains, or after a
power failure, the display
{:{{
will blink.
Setting the time:
❑ Press the
>
button and set the current
time with the rotary knob (e.g.
|Å:{{
).
❑ To amend the time of day, press button
> until the indicator ▲ flashes unter
the
+
symbol.
The correct time of day can then be set.
Note: The time cannot be set if an
automatic function is active (see Electronic
clock for cancelling automatic function).
Initial burn-in
1. Preheat the empty oven for about
30 minutes.
Select heat for the main and mini oven at
a setting of 190 °C.
During the initial burn-in phase, please
open the kitchen windows to dissipate
unpleasant odours.
Preliminary cleaning:
1. Clean the appliance exterior with a soft
moistened cloth.
2. Clean the oven and the accessories with
a hot detergent solution.
To Next Page
Loading...
