NEFF U1ACE2HG0B - Page 13

Basic settings en
13
a When the rapid heating process ends, an audible
signal sounds and the heating indicator goes out.
3.
Use the function selector to set a suitable type of
heating.
4.
Place the food in the cooking compartment.
11 Basic settings
You can configure the basic settings for your appliance to meet your needs.
11.1 Overview of the basic settings
Here you can find an overview of the basic settings and factory settings. The basic settings depend on the features
of your appliance.
Display Basic setting Selection
⁠ ⁠ Automatic childproof lock
→"Childproof lock", Page12
⁠ = no
1
⁠ = yes
2
⁠ ⁠ Time display ⁠ = hide the time
⁠ = display the time
1
⁠ ⁠ Signal duration upon completion of a cook-
ing time or timer period
⁠ = 10 seconds
⁠ = 30 seconds
1
⁠ = 2 minutes
⁠ ⁠ Button tone when pressing a button ⁠ = off
⁠ = on
1
⁠ ⁠ Cooling fan run-on time ⁠ = short
⁠ = medium
⁠ = long
1
⁠ = extra long
⁠ ⁠ Waiting time until a setting is adopted ⁠ = 3 seconds
1
⁠ = 6 seconds
⁠ = 10 seconds
⁠ ⁠ Childproof lock can be adjusted
→"Childproof lock", Page12
⁠ = no
⁠ = yes
1
⁠ ⁠ Water hardness
3
⁠ = softened
⁠ = soft (up to 1.5mmol/l)
⁠ = medium (1.5–2.5mmol/l)
⁠ = hard (2.5–3.8mmol/l)
⁠ = very hard (above 3.8mmol/l)
1
1
Factory setting (may vary according to model)
2
Only possible if ⁠ ⁠ ⁠ has been set
3
Only for appliance types with steam function
11.2 Changing basic settings
Requirement:The appliance is switched off.
1.
Press and hold the ⁠button for approximately
fourseconds.
a The first basic setting appears in the display,
e.g. ⁠ ⁠ ⁠.
2.
Use the ⁠ or ⁠button to change the setting.
3.
Use the ⁠button to switch to the next basic setting.
4.
To save the changes, press and hold the ⁠button
for approx. fourseconds.
Note:Following a power failure, the factory basic set-
tings are restored.
11.3 Discarding changes to the basic
settings
▶
Turn the function selector.
a All changes are discarded and not saved.