NEFF U2GCH7A 0B Series User Manual

Appliance door en
23
Refitting the shelf supports
The shelf supports are designed to fit on either the right-
or the left-hand side (not both).For each of the shelf
supports, make sure that the hooks at the back are at
the top.
1. First, push the shelf support into the middle of the
rear socket ‚ until the shelf support rests against the
cooking compartment wall, and then push it back ƒ
(fig.
!).
2. Then push the shelf support into the front socket „
until the shelf support also rests against the cooking
compartment wall, and then press it downwards …
(fig.
").
qAppliance door
Ap p l i a n c e door With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to clean the
appliance door.
Main oven – Fitting and removing the glass
panels
To facilitate cleaning, you can remove the glass panels
from the appliance door.
Removing and fitting the appliance door
For cleaning purposes and to remove the door panels,
you can detach the appliance door.
The appliance door hinges each have a locking lever.
When the locking levers are closed (figure
!), the
appliance door is secured in place. It cannot be
detached.
When the locking levers are open in order to detach the
appliance door (figure
"), the hinges are locked. They
cannot snap shut.
:Warning
Risk of injury!
■ If the hinges are not locked, they can snap shut with
great force. Ensure that the locking levers are always
fully closed or, when detaching the appliance door,
fully open.
Risk of injury!
■ The hinges on the appliance door move when
opening and closing the door, and you may be
trapped. Keep your hands away from the hinges.
G
F
2
E
D
1
21

NEFF U2GCH7A 0B Series Specifications

General

Brand	NEFF
Model	U2GCH7A 0B Series
Category	Oven
Language	English