13Section 5: Troubleshooting
Unit producing unwanted odors
POSSIBLE CAUSE HOW TO FIX
Gas leak DO NOT OPERATE -Turn off key valve but leave gas source on/open.
(The gas should be flowing through the hose up to the igniter valve)
Inspect hose(s), check for any leaks at all connections and fittings by
using soapy water checking for bubbles. If a leak is found, turn off gas
immediately and consult factory about replacing damaged/defective
component.
If no leak is found:
Liquid Propane Units: inspect propane tank for damage or defect, tank
may need to be replaced.
Natural Gas Units: contact local gas company to inspect
Color fading
POSSIBLE CAUSE HOW TO FIX
Exposure Concrete Units: Purchase cement sealer at your local brick and mortar
retailer and apply a coat to concrete areas every year
To Next Page
