20 Nektar Panorama P1: User Guide www.nektartech.com
CLEANING & MAINTENANCE
If you want to keep Panorama pristine, you’ll need to clean it occasionally. We recommend you use a
moisture-free air duster or electronics spray to clear away any surface dust. Then use electronics dry
cloth or the included lint-free cloth to polish the surface and remove any finger marks.
Note: Do not use any abrasive materials to clean the surface as this may leave scratch marks.
Performing a complete factory reset will erase all presets and maps and return the unit to its default
factory state. Make sure to back up your presets and maps first! For details on backup, make sure to
register your product to gain access to our online documentation.
Here is how you perform a factory reset:
Un-plug the USB cable that connects to Panorama
Press and hold the Patch– and Patch+ buttons (N) and plug the USB cable in to power the unit.
The About page tells you what firmware and hardware versions are currently in your unit.
To activate, select Internal mode and press the two display buttons D1 and D2 simultaneously.
To exit, press D5.
FACTORY RESET
ABOUT
www.nektartech.com Nektar Panorama P1: User Guide 5
PANORAMA OVERVIEW
Here is a brief overview of all the parts of Panorama to which we will refer in the guide. Before you
jump in and start using Panorama, we recommend you get acquainted by identifying each called out part
on your unit.
A
B
C
D
E
F
G
H
K
L
I
J
To Next Page
Loading...
Need help?
General
