EasyManua.ls Logo

Nematron iPC Series - User Manual

Nematron iPC Series
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Nematron Corporation
5840 interface Drive, Suite 100
Ann Arbor, Michigan 48103-9515
USA
Document No. DOC-IPC-003,
User Manual iPC-Series & nPC300, Rev C Rel. 11-2014
iPC Series & nPC300
Ultra-Thin Industrial
Computers w/ i-Processors
User’s Guide
User’s Guide
Question and Answer IconNeed help?

Do you have a question about the Nematron iPC Series and is the answer not in the manual?

Summary

Product Overview and Warranty

Warranty Information

Outlines the product warranty terms and conditions.

Chapter 1 - Introduction

Product Specifications

Agency Certifications

Lists FCC, CE, UL, CSA, and ATEX compliance.

Hazardous Location and Installation Notes

Class I Division 2 Installation Guidance

Provides guidance for Class I Division 2 installations.

ATEX Zone 2;22 Installation Conditions

Details safe use for ATEX hazardous areas.

ATEX Zone 22 Installation Conditions

Requirements for ATEX Zone 22 installations.

Installation Procedures

Panel Mount Installation

Instructions for mounting the iPC series into a NEMA enclosure.

System Configuration and Maintenance

Connecting Power

Instructions for connecting AC and DC power.

Technical Details and Pinouts

Nematron iPC Series Specifications

General IconGeneral
CategoryTouch terminals
SeriesiPC Series
Touch ScreenResistive
Display TypeLCD
Resolution1024 x 768 pixels
ProcessorIntel Core i5
StorageSSD
Operating SystemWindows 10 IoT
IP RatingIP65
Communication PortsEthernet, USB, Serial