12
NL
DK
DE
AR
FR
RU
ES
TR
IT
EN
SE
Perpendicular holding force ⓫
Parallel holding force ⓬
Glass
170kg/375lbs 120kg/265lbs
Ceramic tile
170kg/375lbs 120kg/265lbs
Metal
110kg/242lbs 110kg/242lbs
Plastic
100kg/220lbs 100kg/220lbs
Wood
100kg/220lbs 65kg/143lbs
Rough concrete
80kg/176lbs 80kg/176lbs
Dry cast pavers
80kg/176lbs 80kg/176lbs
Drywall
75kg/165lbs 65kg/143lbs
WARNING: Switching the green motor power button Ⓒ on is advised when approaching
-0.2 bar to avoid loss of vacuum/suction/negative pressure and load detachment.
Running cycles (on full charge)
900 ON-OFF cycles of 10 seconds
Rated air ow
20l/min (0.7cfm)
Applicable surface type
Peak/valley heights less than 3mm/0.1inch,
arc less than 5°
SCOPE OF DELIVERY
NOTICE: The exact scope of delivery may change, but it will always contain the items listed
below. If your delivery contains any additional items, these will be listed separately. See Spare
parts for more information on ordering spare parts.
BASIC NEMO GRABO® SCOPE OF DELIVERY:
• NemoGRABO® (tool only)
• Battery
• Operator’s manual
• Multi-socket battery charger
• Fabric bag OR Blow mold case
TOOL ELEMENTS ➊
A. Battery
B. Red vacuum release button
C. Green motor power button
D. Power ON/OFF switch
E. Battery bar indicator
F. Attachment rings (4x)
G. Pressure gauge
H. Rubber foam seal
I. Air lter pad
J. Air lter lock ring