20
NL
DK
DE
AR
FR
RU
ES
TR
IT
EN
SE
REPLACING THE RUBBER FOAM SEAL ➑
Remove the rubber foam seal if it has become worn or damaged.
1. Pull out the rubber foam seal Ⓗ.
2. Gently press a replacement rubber foam seal into position.
3. Make sure that the replacement rubber foam seal ts correctly and securely.
REPLACING OR CLEANING THE AIR FILTER ➒
Clean the lter when dirty. The lter needs to be replaced when the lter is badly worn or
ripped (at customer’s discretion). This is determined by how the NemoGRABO® is being
used. When lifting clean material, the lter will last longer than when being used on dirty/dusty
materials.
1. Turn the NemoGRABO® upside down.
2. Use the tip of a screwdriver to remove the air lter lock ring Ⓙ and the air lter pad Ⓘ.
3. Do one of the following:
a. Clean the lter with compressed air, or
b. Insert a replacement air lter pad.
4. Insert the air lter lock ring to secure the lter.
! Do not clean a dirty air lter with water! It may become clogged and unusable.
! A decrease in suction power indicates that the air lter needs to be cleaned and/or
replaced. Check that the air duct is free from any obstruction or foreign objects during lter
replacement.
WARRANTY
30-DAY MONEY BACK HARD GUARANTEE
New unused power tools and accessories purchased from Nemo Power Tools or one of
our authorized dealers can be returned to our Las Vegas warranty center within 30 days of
purchase. Please contact your dealer to ask about their specic store policy, or ship your
product (prepaid) in its original undamaged packaging along with the original receipt to: Nemo
Power Tools LLC, Eastern Commerce Center, 6000 S Eastern Ave, Suite 8B, Las Vegas, Nevada,
89119
1-YEAR LIMITED WARRANTY
Nemo Power Tools prides itself on its attention to detail, the quality of its products and
materials used. Therefore, we provide this manufacturer’s warranty from the date of purchase.
You have the option of registering your NemoGRABO® product online, which gives you the
benet of extending the manufacturer’s warranty to a full 18-month period. If you believe you
have received a defective product, or are experiencing any problems with your product, please
visit our Support page - www.GRABO.com/GRABO-warranty. Within the scope of this 1-year
warranty, we will repair or replace, any defects due to defects of material or workmanship free
of charge. For warranty repair information, call +1 (702)-718-2433. This warranty does not
apply if the damage was caused by improper usage of the tool such as water damage, dropping
the tool, overloading the tool beyond its rated capacity, leaving the tool “on” while in storage,