_ _ _ _ * 4 0 # (gate alarm not bypassed)
Use this feature to prevent the alarm from sounding when the gate is open for longer than
the gate delay time. The gate delay time is an installer programmable time.
If the gate alarm is bypassed, the symbol under the GATE label on the keypad will be
lit and on the energizer display the symbol linked to the GATE ALARM label will be
shown.
GATE ALARM INSTANT _ _ _ _ * 7 1 # (gate alarm instant)
_ _ _ _ * 7 0 # (gate alarm delayed)
Use this feature to cause the alarm to sound the moment the gate is opened without
waiting for the gate delay time to expire.
If the gate alarm is instant, the i symbol under the GATE label on the keypad will be lit
and on the energizer display the i symbol linked to the GATE label will be shown.
(No symbol exists on the DRUID 4-Zone keypad).
GATE CHIME _ _ _ _ * 5 1 # (gate chime enabled)
_ _ _ _ * 5 0 # (gate chime disabled)
Use this feature to sound an alert when the gate opens. When enabled the internal beeper
will sound three beeps the moment the gate is opened. The gate alarm will continue to
function as configured.
No symbol exists on the keypad or energizer to indicate that this function is active. Enable
or disable this function as needed.
To Next Page
Loading...
