Nemtek DRUID - Service Conditions and Fuses; Fuse Description and Fault Symptoms

8
DRUID Service Conditions
FUSE DESCRIPTION & FAULT SYMPTOMS
PC BOARD
F1
F3
F2
PC BOARD
F1
F3
F2
HOW TO CHECK: (ALL FUSES ARE 2 AMPERE FAST BLOW)
18Vac Supply Fuse
F1: Power light is not lit, even when mains is present
Auxiliary Output Fuse
F2: Siren or strobe light does not operate (ensure that the unit was
switched off with no fault conditions)
Battery Protection Fuse
F3: Energizer does not operate when mains is switched off