NEO BOMBER - Unique Features; Remote Device Management (RDM); Software Upgradeability; Hibernation Mode

16 14 Control
Normal 0 7
Reset All 8 15
Pan&Tilt Reset 16 23
TBD 24 55
Display O 56 63
Display On 64 71
TBD 72 79
TBD 80 87
Hibernation 88 95
TBD 96 255
6. Unique Features
6.1 RDM, stand for “Remote Device Management”, with this
function, users can realize remote control of the device, such
as remotely changing DMX address, reverse pan/tilt setting,
check a lot of useful information such as temperature, pow-
er consumption, fan speed. Etc. Every single device has a
unique RDM code before le factory to distinguish from each
other, usually not suggest users change this code freely.
6.2 Soware upgrade function via DMX cable, if there is any
new rmware for this device come out, it can be upgraded
simply via a soware upgrade box, no need to change any
mechanical parts. The upgrade box is not included in the
package, if need any further assistance pls just contact
authorized dealers.
6.3 Hibernation, the device will enter sleeping mode if acti-
vated aer a period of disconnecting DMX signal to save the
power consumption, and will return immediately as soon as
the DMX signal is sent again.
6.4 Display back-up communication IC, there is a back-up
communication IC installed in the display PCB, so users
could replace at once if the working one is broken, no need
to wait long time from service.
6.5 Display ip, by press up and down button for more than
3 seconds, the display will ip automatically, this function is
useful to read menu conveniently when device is hanged.
BOMBER
ENGLISH VERSION
p. 12