Functional description2
Mail Piece Production Control (MPPC) is an option available for DS-75, DS-85, DS-90 and
DS-90i. It verifies the inserted documents or sets of documents with a database, which is
generated when printing the documents.The system will give a warning when a mail piece
is missing at the exit of the Document System.
During the printing process a 2D barcode is added to the address information of the
addresses.This barcode is added with the Print Machine software. The code will also
appear in the window area of the envelope as the document or set of documents is inserted.
At the exit of the Document System the window area of the envelope is scanned by a
camera, which is triggered by the Document System.The barcode information is send to
a PC. This PC is connected to the database (BSPI module) of the Print Machine software
to verify the ID in the barcode with the ID listing in the database.When an ID is
corresponding with the particular line in the listing, this line will get a verification tag. If an
ID is missing or if there is a misread, a warning will be placed in the listing. The system
can also be set to stop the Document System if this occurs.
3
| Page 3 | Nov-25-2014 09:44 | Functional description
2
English
To Next Page
Loading...
Need help?
General
