Neopost PF-90 User Manual (English)

Questions and Answers:

B
Barbara SmithAug 23, 2025
How to troubleshoot Neopost Folding Machines when control panel lights are not illuminated?
- M
  Meagan HunterAug 25, 2025
  If the control panel lights on your Neopost Folding Machine are not illuminated, there might be several reasons: * There's no power at the wall outlet. Check the wall outlet. * There's no power to the machine inlet. Inspect the power cord for any frayed or broken wires. * There's no power to the control panel. Press the button on the circuit breaker. * There is an internal electrical failure. In this case, you should call for service.
P
patrickcarrAug 25, 2025
What to do if Neopost Folding Machines display 'Paper out'?
- J
  Jason RiveraAug 25, 2025
  If your Neopost Folding Machine displays 'Paper out', it means the in-feed tray is empty. Simply place documents on the in-feed tray to resolve this issue.
B
baileynicholasAug 27, 2025
Why did my Neopost Folding Machines lose power?
- C
  Christine RamirezAug 27, 2025
  If your Neopost Folding Machine is experiencing a power loss, it could be due to a tripped circuit breaker. Try pressing the black reset button on the back of the machine. Also, under adverse conditions, the power input level may drop below acceptable limits. When power is restored, turn the machine off, then turn it on again to restore normal operations.
T
Tracy JacksonAug 27, 2025
How to fix double feeding forms in Neopost PF-90 Folding Machines?
- R
  ricemartinAug 27, 2025
  If your Neopost Folding Machine is double feeding forms, it could be because the documents are stuck together or because more tension is needed. To fix this, jog the forms to remove static electricity and/or adjust the infeed tension lever. If the feed tire or separator is worn, call for service.
B
Brandon EsparzaSep 16, 2025
How to remove black marks on paper from Neopost Paper folding machines?
- S
  sandersryanSep 16, 2025
  If you notice black marks on the folded paper from your Neopost Paper folding machine, the in-feed tires, separator, and/or fold rollers are likely dirty. Clean these parts using an approved roller cleaner and rejuvenator.
T
Travis RobertsonSep 13, 2025
Why are documents wrinkled in Neopost Paper folding machines?
- B
  bchristianSep 13, 2025
  If documents are wrinkled or crunched when using your Neopost Paper folding machine, it might be because the fold tables are not inserted correctly. Remove and reinstall the fold tables, making sure they are properly positioned. Also, check for and remove any pieces of paper or other materials stuck in the fold table.
M
Mary ClarkSep 14, 2025
What does 'Cover Open' mean on Neopost Paper folding machines?
- J
  Jason BarberSep 15, 2025
  If your Neopost Paper folding machine displays “Cover Open”, ensure that the cover is closed. The magnetic switch may be broken, or another issue may be present, possibly requiring a service call.
R
Robin ConwaySep 5, 2025
What to do if my Neopost Paper folding machines displays 'Paper Jam'?
- M
  mccormickjamesSep 5, 2025
  If your Neopost Paper folding machine displays 'Paper Jam', it's likely due to a paper misfeed or a paper jam at the exit of the folder. To resolve this, reload the paper or remove the jammed paper and then press the “Counter Reset” button.
D
David TurnerSep 3, 2025
What does it mean when Neopost PF-90 display 'Cover Open'?
- J
  Joel HarperSep 3, 2025
  If your Neopost Folding Machine displays 'Cover Open', the magnetic switch may be broken. Ensure that the cover is closed.
J
Jeffrey JordanSep 4, 2025
What to do if the fold table stop isn't moving on Neopost PF-90 Folding Machines?
- T
  Tracy GonzalezSep 4, 2025
  If the fold table stop is not moving when “Test”/ “Start” is pressed on your Neopost Folding Machine, the fold table may not be plugged in. Ensure the fold table is properly plugged in. If the issue persists, there may be an electrical or mechanical failure, and you should call for service.