Neopost PF-90 User Manual

OPERATION
1. Place power switch in the ON / “O” position.
2. Extend the catch tray as required.
3. PF-80 ONLY: Move the stacker wheels to the proper
position for the paper size (Fig. 6) (Refer to chart on
page 8). Stacker wheels will automatically adjust on
the PF-90.
4. Set the self-centring paper side guides for the width of
the paper and lock in position using thumbscrews.
5. Adjust in-feed tray tension lever (Fig 7) for different
paper weights. Move the lever up towards the “-”
symbol for lighter paper and down toward the “+”
symbol for heavier paper. The middle position is for
standard paper weights.
6. Raise the in-feed tray lever to lower the in-feed tray.
7. Neatly stack paper on the in-feed tray.
8. Lower the in-feed tray lever to raise the in-feed tray.
Fig. 6
5
Tension Lever
Fig.7
Self centering side guides
Fig.7
Stacker Wheels
Stacker Wheel Positions A, B & C
© 2009 Neopost USA Inc. All rights reserved.

Neopost PF-90 Specifications

General

Brand	Neopost
Model	PF-90
Category	Folding Machines
Language	English