Neopost IN-360 Self-Installation Guide

STEP 2
INSTALL THE POSTAGE METER
Open the Mail'n Ship Station
Cover
Open the top cover by lifting at the open
slot
Remove the PSD (Postage
Meter) from the packaging
Insert the Postage Meter into
the Mail'n Ship Station
1. Open the Postage Meter Cover in the left
side
2. Slide the Postage Meter securely into
the slot, positioning the postage meter
so the contacts are facing the rear of the
base and the locator runner (ridge) is
towards the bottom.
3. Close the Postage Meter Cover
3
A B C

Neopost IN-360 Specifications

General

Brand	Neopost
Model	IN-360
Category	Postal Equipment
Language	English