STEP 4B
Select a location for the Mail'n
Ship Station near an analog
telephone jack.
The following are usually analog phone
lines:
» Fax lines
» Lines used by modems or credit
card readers
» Most residential phone lines
Connect the modem.
1. Plug one end of the telephone
cable into the analog phone outlet.
2. Take the other end of the phone
cord and connect it to the USB
modem.
3. Plug the USB modem into the USB
port located on the left side of the
Mail'n Ship Station.
CONNECTING THE MODEM (OPTIONAL ACCESSORY)
Connect the power.
Using the Power Cord, plug the female
connector into the right bottom back
corner of the Mail'n Ship Station. Take
the male end and plug it into the
power outlet.
8
A B C
To Next Page
Loading...
Need help?
General
