Nera Saturn B - Access Code

Saturn B/M Enhanced Functions – Chapter 2. Standard
2.13
Access Code
Access code protection is recommended used on all ports configured
for connection of telephone.
Selecting Ports for Access Protection
1 Select ENHANCED
SETUP function (89):
2 Scroll down to check Access
Code state:
If no ports are access code protected:
Current operation status (SETUP and
UPDATE operations require RENTER
level):
If PASSWORD PROTECTED, refer
to "Setting Renter/Owner Level".
3 Change selection to ports
HANDSET, TEL.1 and TEL.5:
0=handset, 1-5=TEL.1 - 5
(Use DEL to deselect ports)
4 Assign operation access levels, e.g.:
2=operator (OPER)
3=renter (RENT)
4=owner (OWN)
5 Verify settings:
and revert to IDLE:
FUNC
ON
MORE/
HELP
9
LIGHT
YZÆ
8
VWX
TAX
1
ABC
3
GHI
LIST
0
ÄÖÜ
5
MNO
4
JKL
ENHANCED
SETUP
89
ON
ACCESS CODES
PORTS: 35
ON
ACCESS CODE
PASSIVE
ON
RENT.
RENT.
ON
WHICH PORTS
015
ENTER
ENTER
ENTER
ON
ACCESS CODE
PORTS: 015
ENTER
ON
OWN.
RENT.
ESC
3x
MORE/
HELP
MORE/
HELP
ENTER
ON
SETUP OPE.
4
UPDATE OPE.
3
Access Code