7
EN
4. RECOMMENDATIONS FOR SAFE USE
Never add hot water to the water tank!
After nishing preparation, bar display
ashes and power button blinks red for
about 5 seconds. During that time do
not open locking handle!
Do not touch used capsule after
beverage preparation! Hot surface, risk
of burns!
Never use a wet sponge. Only use a
soft damp cloth to clean the top of the
machine.
Always keep the machine upright!
Never touch injector with surface of
nger!
For rinsing and beverage preparation
only use fresh drinking water.
Do not touch plug with wet hands. Do
not touch machine with wet hands!
IF LEFT UNUSED FOR MORE THAN 2 DAYS: Fill
water tank with fresh drinking water and insert
it into machine. Rinse machine, therefore follow
instructions in “7. CLEANING“ on page 12,
beginning with step 4. Remove water from
water tank. Dry water tank. Insert water tank into
machine.
Do not use the rinsing tool for tea or hot
water preparation.
To Next Page
Loading...
