- 4 -
Section I SafSection I Saf
Section I SafSection I Saf
Section I Saf
etyety
etyety
ety
WarningsWarnings
WarningsWarnings
Warnings
Make sure you read and understand all instructions and safety precautions
listed in this manual before installing or operating your unit. If you have any
questions concerning the operation of your unit or the information in this
manual, contact our Sales Department for assistance (see Preface, After-
sale Support).
Performance of installation, operation, or maintenance proceduresPerformance of installation, operation, or maintenance procedures
Performance of installation, operation, or maintenance proceduresPerformance of installation, operation, or maintenance procedures
Performance of installation, operation, or maintenance procedures
other than those described in this manual may result in a hazardousother than those described in this manual may result in a hazardous
other than those described in this manual may result in a hazardousother than those described in this manual may result in a hazardous
other than those described in this manual may result in a hazardous
situation and may void the manufacturer’s warranty.situation and may void the manufacturer’s warranty.
situation and may void the manufacturer’s warranty.situation and may void the manufacturer’s warranty.
situation and may void the manufacturer’s warranty.
Transport the unit with care. Sudden jolts or drops can damage theTransport the unit with care. Sudden jolts or drops can damage the
Transport the unit with care. Sudden jolts or drops can damage theTransport the unit with care. Sudden jolts or drops can damage the
Transport the unit with care. Sudden jolts or drops can damage the
refrigeration lines.refrigeration lines.
refrigeration lines.refrigeration lines.
refrigeration lines.
Do not attempt to defeat any of the interlock switches or safetyDo not attempt to defeat any of the interlock switches or safety
Do not attempt to defeat any of the interlock switches or safetyDo not attempt to defeat any of the interlock switches or safety
Do not attempt to defeat any of the interlock switches or safety
features built into the unit.features built into the unit.
features built into the unit.features built into the unit.
features built into the unit.
Observe all warning labels.Observe all warning labels.
Observe all warning labels.Observe all warning labels.
Observe all warning labels.
Never remove warning label.Never remove warning label.
Never remove warning label.Never remove warning label.
Never remove warning label.
Never operate damaged or leaking equipment.Never operate damaged or leaking equipment.
Never operate damaged or leaking equipment.Never operate damaged or leaking equipment.
Never operate damaged or leaking equipment.
Never operate the unit without cooling fluid in the fluid reservoir.Never operate the unit without cooling fluid in the fluid reservoir.
Never operate the unit without cooling fluid in the fluid reservoir.Never operate the unit without cooling fluid in the fluid reservoir.
Never operate the unit without cooling fluid in the fluid reservoir.
Make sure the unit is off before connecting or disconnecting theMake sure the unit is off before connecting or disconnecting the
Make sure the unit is off before connecting or disconnecting theMake sure the unit is off before connecting or disconnecting the
Make sure the unit is off before connecting or disconnecting the
power cord or other cables.power cord or other cables.
power cord or other cables.power cord or other cables.
power cord or other cables.
Always turn off the unit and disconnect the power cord from theAlways turn off the unit and disconnect the power cord from the
Always turn off the unit and disconnect the power cord from theAlways turn off the unit and disconnect the power cord from the
Always turn off the unit and disconnect the power cord from the
power source before performing any service or maintenancepower source before performing any service or maintenance
power source before performing any service or maintenancepower source before performing any service or maintenance
power source before performing any service or maintenance
procedures, or before moving the unit.procedures, or before moving the unit.
procedures, or before moving the unit.procedures, or before moving the unit.
procedures, or before moving the unit.
Always empty the fluid reservoir before moving the unit.Always empty the fluid reservoir before moving the unit.
Always empty the fluid reservoir before moving the unit.Always empty the fluid reservoir before moving the unit.
Always empty the fluid reservoir before moving the unit.
Never operate equipment with damaged power cords.Never operate equipment with damaged power cords.
Never operate equipment with damaged power cords.Never operate equipment with damaged power cords.
Never operate equipment with damaged power cords.
Refer service and repairs to a qualified NESLAB technician.Refer service and repairs to a qualified NESLAB technician.
Refer service and repairs to a qualified NESLAB technician.Refer service and repairs to a qualified NESLAB technician.
Refer service and repairs to a qualified NESLAB technician.
In addition to the safety warnings listed above, warnings are posted
throughout the manual. These warnings are designated by an exclamation
mark inside an equilateral triangle with text highlighted in bold. Read and
follow these important instructions. Failure to observe these instructions
can result in permanent damage to the unit, significant property damage, or
personal injury or death.
To Next Page
Loading...
Need help?
General
