To Next PageTo Next Page
Need help?Do you have a question about the Neslab HX-200 and is the answer not in the manual?
Instructions for handling the unit upon arrival, including retaining packing material and reporting damage.
Details about the unit's warranty coverage, duration, and return procedures for service.
Information on contacting NESLAB for operational questions, spare parts, or service support.
Crucial safety instructions, including general precautions, handling, and operating warnings to prevent hazards.
Overview of the HX Series Recirculating Chiller, its design purpose, components, and available options.
Guidelines for selecting a suitable location for air-cooled units, including environmental and ventilation requirements.
Procedures for starting the chiller, including pre-operation checks and power-on sequence.
Explanation of temperature control settings, including the calibrated dial and HEAT/COOL indicators.
Explanation of the pump motor overload protector, its function in preventing damage, and reset procedures.
Details on NESLAB's on-site service contracts for unit maintenance and extended life.
Procedure and frequency for cleaning the condenser fins on air-cooled units to maintain cooling capacity.
Recommendations for preventing algae growth, including keeping the reservoir covered and using opaque recirculation lines.
Instructions for cleaning the pump strainer on PD and TU pumps, including location and removal procedures.
A list of common operational problems, their possible causes, and initial troubleshooting steps.
Instructions on contacting NESLAB Service Department for further assistance, including required information.
Diagrams illustrating the refrigeration flow path for HX-75 to HX-150 and HX-200 to HX-750 models.
General