Nespresso Momento 100 - Prepare Coffee Modules

16 Momento Service manual Version 0.1 EN
Installaon > Prepare coee modules
Preparecoeemodules
Mount cup holder supports
a b
Fig. 13
1. Insert the cup holder support (a) on one side of the coee module.
2. Slide the cup holder support upwards and screw it on (TX20).
3. Aach the blind cup holder (b) the same way on the other side of the coee
module.
4. Assemble the cup holder support and the blind cup holder on the other coee
module inversely.
Please note that both cup holder supports and blind cup holders are mirror
invertedinrelaontoeachotherandcannotbeassembledarbitrarily.