Finish setup with the app
1. Connect to Wi-Fi
First, you’ll tell the app where you installed Nest Hello. Then select your Wi-Fi network
and enter the password. Hello will then connect to Wi-Fi.
Troubleshooting
● If Hello can’t connect to your Wi-Fi network, you can try moving your router a bit closer
or adding a Wi-Fi extender.
● If you already have a Nest product installed in your home, Hello will try to get your
Wi-Fi info from it. Try moving it closer to Hello if possible or, temporarily uninstall Hello
and plug it in closer to the assisting product while you try connecting to Wi-Fi again.
2. Test the video stream
Once Hello is connected to Wi-Fi and the app, the app will test the video.
3. Turn off the chime and test
Before you test Hello, turn off the chime option in the app - even if you don’t have a wired
doorbell chime installed.
1. Exit Hello setup by tapping Done.
2. Tap your Hello on the Nest app home screen. Then tap Settings .
3. Set the Indoor chime On/Off option to off.
4. Now press Hello’s button to check that it’s working. You should also get a
notification
from the app that someone’s at your door.
To Next Page
Loading...
