Net.Do TG24 - 4 Record and Running; Manual Control; Record and Edit; Record Scene

Net.DO Lighting Control Equipment Co.,Ltd http://www.netdo.com.cn
TG24/48 LIGHTING CONTROLLER PAGE: 8
4 Record and Running
4.1 Manual Control
1.Push the GRAND MASTER and PRESET MASTER Fader to the maximum.
2.Push PRESET Fader to change the value of channel.
4.2 Record And Edit
SUBMASTER Fader 1~9 only can record scene, 10~12 can record Scene or Chase.
4.2.1 RECORD SCENE
1. Push GRAND and PLAYBACK MASTER Fader to the maximum.
2. Push PRESET Fader to change the value of channel.
3. Hold down the INSERT(+) key and press the SUBMASTER key, the present light effect
will be recorded in the scene.
4.2.2 DELETED SCENE
Hold down the DELETE key and press the SUBMASTER key to delete.
4.2.3 EDIT CHASE
1. Press the PROGRAM key to enter program, the LED will flash;
2. Press the SUBMASTER key to select Chase number;
Eg: Edit Page 8, chase 10 -----, Turn to Submaster Page 8 and press SUBMASTER
key 10.
3. Press INSERT(+) to add a Chase-step; Chase Number
Total Steps Current Step
PROGRAM ...
Select chase ……
P-CHASE: （8.10）
tol = 001 st
[
* 1
]