Netafim AlphaDisc CLD Quick Guide

| AlphaDisc BLE quick user guide V2.0
7
Pairing AlphaDisc™ CLD Controller using the AlphaDisc™ BLE Mobile Application
Notice: Pairing the AlphaDisc™ CLD controller with the Bluetooth® application will utilize part of the full list of features
available in the cloud applications. Netafim recommends pairing the AlphaDisc™ CLD controller with the dedicated
AlphaDisc™ CLD applications (Mobile and Desktop).
To pair the controller with the AlphaDisc™ BLE Mobile Application:
1. Verify your mobile device’s Bluetooth® discovery mode is activated. To start pairing with the AlphaDisc™ CLD
controller, click " " in the window. The application scans for controllers within the Bluetooth® range (10-15
meters).
2. Select your controller from the controllers list in range. The application will start pairing.
3. Verify that the blue/green LED on your controller is blinking. Click "YES" to confirm.
4. At the end of the pairing process, complete the Site ID form: name your site, enter filter model and controller
serial number if needed. You may add a site photo by clicking on "Add Photo". Click " ".
5. Enter the Site Information details (optional), Click "SUBMIT" to add your new filter to the Sites List.
6. To view data from your controller, select the active controller from the “Sites List”, marked by the active
Bluetooth® icon.

Netafim AlphaDisc CLD Specifications

General

Brand	Netafim
Model	AlphaDisc CLD
Category	Controller
Language	English