Need help?Do you have a question about the Netafim FROSTIE and is the answer not in the manual?
General| Category | Controller |
|---|---|
| Manufacturer | Netafim |
| Product Name | FROSTIE |
| Type | Frost Protection Controller |
| Operating Voltage | 12V DC |
| Compatibility | Netafim Irrigation Systems |
| Application | Agricultural Frost Protection |
| Control Method | Automatic |
Displays and allows clearing of the lowest recorded humidity value.
Displays and allows clearing of the highest recorded humidity value.
Displays and allows clearing of the lowest recorded dew point value.
Displays and allows clearing of the highest recorded dew point value.
Displays and allows clearing of the lowest recorded temperature.
Displays and allows clearing of the highest recorded temperature.
Allows selection between Celsius and Fahrenheit for temperature display.
Instructions on how to clear all events from the event log.
Displays the lowest temperature recorded for a specific hour.
Displays the highest temperature recorded for a specific hour.
Displays the lowest humidity recorded for a specific hour.
Displays the highest humidity recorded for a specific hour.
Allows selection of 12 or 24 hour format for time display.
Allows the user to set the current time on the device.
Allows selection of the date display format.
Allows the user to set the current date on the device.
Indicates critically low battery levels, requiring replacement.
Error indicating a short circuit in the solenoid wiring.
Error indicating an open circuit in the solenoid wiring.
Indicates failure to charge the solenoid, possibly due to flat batteries.
A list of steps and references for the FROSTIE installation process.
Description of the digital input terminals and their usage (not used by FROSTIE).
Details on connecting solenoid wires to the device's terminals.
Details on connecting relay wires to the device's terminals.
How to navigate to and interpret the battery status display.
Information on using an external power source and its interaction with batteries.
Explains frost damage factors and FROSTIE's role in compensation.
Step-by-step guide to testing the solenoid or relay output functionality.
A visual representation of alarm thresholds based on air temp and humidity.
Sets the operational mode of the alarm (e.g., Auto, Off, On).
Sets the air temperature threshold for triggering the frost alarm.
Sets the chill factor for calculating the frost alarm trigger point.
Sets the minimum duration the alarm output remains active.
Sets the minimum duration the alarm output remains inactive.
Sets the temperature differential for alarm cancellation.
Indicates the alarm is manually held in the off state.
Indicates the alarm is manually held in the on state.
Displays real-time operational status and timers in Auto mode.
To Next Page
