Netafim FROSTIE User Manual

THE LOG mENu - dISpLAyING THE EvENT LOG
The event log keeps a list of periods during which the alarm output was turned on automatically. It also stores the temperature and
humidity that were measured at the start of the alarm period.
FROSTIE can be left running unattended for long periods. Every so often, the log should be checked for any alarms that occurred since
the last time it was inspected. Events can be noted in a table like the one on page 23
Start date Start time Duration Temperature
Relative
Humidity
31/05/06 5:42 am 4:30 5.37ºC 35 %
Once the events have been noted, the log can be emptied ready to accumulate new events. FROSTIE can hold up to 20 events. If
more than 20 events accumulate, the oldest ones are overwritten first.
TO CLEAR THE LOG:
Go to the Log menu and hold down the EXIT button for 3 seconds to clear all events from the log.
Number of events
Hold EXIT for 3 seconds
9

Netafim FROSTIE Specifications

General

Brand	Netafim
Model	FROSTIE
Category	Controller
Language	English