NetApp E Series - Page 120

3. Using the feature pack submodel ID, locate the corresponding Controller submodel ID for the starting
configuration and find the Feature Activation Code for the desired ending configuration within the table
below. Then, copy that Feature Activation Code to a text file.
Baseboard ports are disabled when running an NVMe protocol on the HIC.
If you are not using the IB HIC, you can ignore the HIC Ports column in the following tables:
Encryption Capable Feature Activation Codes (Baseboard Port Only Conversions)
Starting Configuration Ending Configuration
Controller submodel
ID
Ports to Convert Controller
Submodel ID
Ports Converted To Feature Activation
Code
360 FC baseboard ports 362 iSCSI baseboard
ports
SGL-2SB-ZEX13
362 iSCSI baseboard
ports
360 FC baseboard ports 5GI-4TB-ZW3HL
Encryption Capable Feature Activation Codes
Starting configuration Ending configuration
Controller
Submodel ID
Baseboard
Ports
HIC Ports Controller
Submodel ID
Baseboard
Ports
HIC Ports Feature
Activation
Code
118