Need help?Do you have a question about the NetApp DS460C and is the answer not in the manual?
General| Model | DS460C |
|---|---|
| Category | Storage |
| Form Factor | 4U |
| Drive Support | 60 drives |
| Drive Types | SAS |
| Connectivity | 12Gb/s SAS |
| Host Connectivity | SAS |
| RAID Support | RAID 6 (with NetApp storage controllers) |
Understand ESD, system readiness, and drive requirements for hot-swapping.
Review ESD, system readiness, and drive requirements for hot-swapping in DS460C.
Procedure to disconnect and remove cable chains from a DS460C drive drawer.
Steps to safely slide out and remove a drive drawer from the DS460C disk shelf.
Procedure for inserting a new drive drawer into the DS460C disk shelf and reinstalling drives.
Steps to reconnect the left and right cable chains to the DS460C drive drawer and enclosure.
Steps for safely removing and replacing a failed fan module in a DS460C disk shelf.
Verify system configuration, cabling, and aggregate status before hot-removing a disk shelf.
Steps for hot-swapping or replacing an IOM12 module based on system configuration.
Steps for hot-swapping a failed power supply in DS460C, DS224C, or DS212C disk shelves.
Interpret LEDs on the operator display panel for DS460C, DS224C, and DS212C disk shelves.
Understand the status indicators on IOM12 modules for normal operation and errors.
Interpret LEDs on power supplies for DS460C, DS224C, and DS212C disk shelves.
Check fan LEDs on DS460C disk shelves for functioning and error states.
Interpret LEDs on disk drives for DS224C, DS212C, and DS460C disk shelves.
To Next Page
