NetApp FAS8200 - User Manual

Maintain
ONTAP Systems
NetApp
November 23, 2021
This PDF was generated from https://docs.netapp.com/us-en/ontap-systems/fas8200/bootmedia-replace-
overview.html on November 23, 2021. Always check docs.netapp.com for the latest.

Summary

Boot Media Replacement and Checks

Replace the boot media - FAS8200

Procedure for replacing the boot media on FAS8200 systems.

Check Onboard Encryption Keys - FAS8200

Check encryption keys before shutting down a node on FAS8200.

NVE;NSE Configuration Check (ONTAP 9.5 and Earlier)

Verify NVE Configuration

Steps to verify NetApp Volume Encryption (NVE) configuration.

Verify NSE Configuration

Steps to verify NetApp Storage Encryption (NSE) configuration.

NVE;NSE Configuration Check (ONTAP 9.6 and Later)

Verify NVE Configuration

Steps to verify NetApp Volume Encryption (NVE) configuration.

Replace Caching Module

Shut down the impaired controller

Procedure to shut down or take over the impaired controller.

Switch Back Aggregates (Two-Node MetroCluster)

Verify Node States

Verify that all nodes are in the enabled state for MetroCluster.

NetApp FAS8200 Specifications

General

Controller	Dual
Maximum Drives	1440
NVMe Flash Cache	Yes
Form Factor	4U
Operating System	ONTAP
High Availability	Yes
NVRAM	32GB
Maximum Flash Cache	12TB
Connectivity	16Gb FC
Maximum Memory	256GB
Protocols	NFS, CIFS, iSCSI, FC
Processor	Intel Xeon
Drive Types Supported	SAS, SSD
Data Protection Features	RAID-DP, RAID-TEC, SnapMirror, SnapVault