Prepare for installation Install hardware Cable storage
Complete system setup
and configuration
1 2 3 4
FAS8200 Systems
Installation and Setup Instructions
Prepare for installation | 1
Screwdriver Windows client
Runs the software to configure
your storage system
Rack space
3U per chassis
You provide
In the box
Power cables
Controller-to-controller cables
Cluster interconnect cable
Part number 112-00297 or 112-00299
Storage cables
SAS cables
Part number 112-00436 or
112-00437 or 112-00438
Ethernet cables
Additional network cables
For connecting your storage to your network
switch and Microsoft
®
Windows
®
client
Host cables
10 GbE network cable
Part number 112-00299 or
112-00300 or 112-00301
Optical network cable
Part number 112-00188 or
112-00189 or 112-00090
Pre-setup
1. Go to mysupport.netapp.com and create an account, register your system, and get your license keys.
2. Unpack all boxes and inventory contents.
2. Go to to AFF and FAS System Documentation Center and click FAS8200 systems, and then click Installation and Setup:
- Download and complete the Cluster Configuration Worksheet.
- Watch the videos listed under Setup videos.
.
215-15015_A0
To Next Page
Need help?
General
