EasyManua.ls Logo

NetApp E Series - Maintain E5700 Hardware; Hardware Components Overview; Replace E5700 Battery; Requirements for Battery Replacement

NetApp E Series
133 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
E5700
Maintain E5700 hardware
For the E5700 storage system, you can perform maintenance procedures on the
following components.
Batteries
A battery is included with a controller canister and preserves cached data if the AC power fails.
Controllers
A controller consists of a board, firmware, and software. It controls the drives and implements the System
Manager functions.
Canisters
Canisters consist of three different types: power-fan canisters (power supplies) that supply a redundant power
source and adequate cooling in a 12-drive or 24-drive controller shelf or drive shelf; power canisters that are
used for power redundancy in a 60-drive controller shelf or drive shelf; and fan canisters that are used for
cooling the 60-drive controller shelf or drive shelf.
Drives
A drive is an electromagnetic mechanical device that provides the physical storage media for data.
Host interface cards (HICs)
A host interface card (HIC) can optionally be installed within a controller canister. The E5700 controller
includes built-in host ports on the controller card itself, as well as host ports on the optional HIC. Host ports that
are built into the controller are called baseboard host ports. Host ports that are built into the HIC are called HIC
ports.
Host port protocol
You can convert the protocol of a host to a different protocol so that compatibility and communication can be
established.
Batteries
Requirements for E5700 battery replacement
Before you replace an E5700 battery, review the requirements and considerations.
Each controller canister includes a battery that preserves cached data if the AC power fails.
1

Other manuals for NetApp E Series

Related product manuals