17
CONFIGURING YOUR GATEWAY
To complete the setup, you will need the following information from
your service provider:
- Connection type (PPPoE/Dynamic IP/Static IP)
- Other specics depending on your connection type including
VL AN Tag, WAN IP Address, Subnet Mask and DNS Servers
When you have the necessary information, follow these steps:
1. Push the power button on the back of the Wi-Fi Gateway to turn
it on. Wait a few minutes for it to complete starting up.
2. Connect to the gateway using Wi-Fi or an Ethernet cable to the
yellow LAN port.
3. Open a web browser and type 192.168.20.1 into the address bar,
then press Enter.
4. At the login screen, type admin into the Username eld. In the
Password eld, type the unique Password printed on the label on
the bottom of the gateway, then click on the Login > button
5. Follow the Basic Setup to complete the conguration.
To Next Page
Loading...
