NetComm CF40MESH Troubleshooting Guide

Wireless Troubleshooting Guide
CF40MESH
Wireless Troubleshooting Guide – CF40MESH
FA01365 v. 1.01 10 February 2023
Wireless Troubleshooting guide
First, check that your Gateway WiFi is turned ON.
Next, check LED light status for 2.4 GHz and 5 GHz WiFi. If 2.4 GHz and 5 GHz WiFi LEDs are not lit, it means
that your WiFi service is disabled.
Accessing Gateway web user interface
1 Connect your computer to the Gateway using wired or wireless connection. A computer connected
using ethernet cable is strongly recommended.
2 Open a web browser (such as Internet Explorer, Google Chrome, Safari or Mozilla Firefox), type following
address into the address bar and press
Enter.
http://192.168.20.1
3 Enter Gateway Login Username and Password printed on the label at the bottom of the Gateway and
press
Login.

NetComm CF40MESH Specifications

General

Model	CF40MESH
Wi-Fi Standard	802.11ac
Frequency Bands	2.4 GHz, 5 GHz
Mesh Capability	Yes
Security Protocols	WPA2, WPA3
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 70°C
Humidity	10% to 90% non-condensing
VoIP	No
Device Type	Gateway
Ethernet Ports	4 x Gigabit Ethernet
USB Ports	1
Antennas	Internal Antennas
Maximum Wi-Fi Speed	1200 Mbps