15 of 22
CloudMesh Satellite – User Guide
UG01350 v1.00 14 July 2021
F i gure 10 – Ethernet cable connecting PC with CloudMesh Satellite
3 Open a web browser and type in the address of your Satellite:
a If your CloudMesh Satellite is paired to a CloudMesh Gateway, type the unique hostname as
described earlier in this section.
b If your CloudMesh Satellite is not paired to a CloudMesh Gateway, type the static IP address that
you defined using the instructions in
Appendix B – Set Clo udMesh Sa tellite I P t o a ccess w eb
i nterface
.
4 At the Authorization Required screen:
F i gure 11 – Log in to NS-02 user i nterface
a Type admin into the Username field,
b Enter the serial number (Serial No) printed on the label on the label on the bottom of the
satellite into the
Password field, and
c Click the Login button. The status page is displayed.
5 Select System > Backup/Flash Firmware from the menu in the toolbar of the screen:
F i gure 12 – Check current firmware version
To Next Page
Loading...