NetComm Gateway Serie User Manual

1
Connecting Your Device
• Connect the supplied RJ-11 cable to the ADSL port on the back of your router,
and then to the phone port that supplies your ADSL.
• Connect the supplied RJ-45 Ethernet cable to one of the LAN ports on the
back of your router and to the LAN port on your computer
• Connect the supplied power adapter to your router and press the on/off button
to power the router on.
Computer
Phone port
Power
Point
Power
Adapter

NetComm Gateway Serie Specifications

General

Category	Wireless Router
Ethernet Ports	4 x Gigabit Ethernet
Wireless Standards	802.11ac
Frequency Band	2.4GHz and 5GHz
Security Features	WPA3