NetComm NF8AC User Manual

28
NetComm Wireless NF8AC User Guide
www.netcommwireless.com
Port Triggering
Some applications require specific ports in the Router’s firewall to be open for access by remote parties. Port Triggering opens up
the ‘Open Ports’ in the firewall when an application on the LAN initiates a TCP/UDP connection to a remote party using the
‘Triggering Ports’.
The Router allows the remote party from the WAN side to establish new connections back to the application on the LAN side using
the ‘Open Ports’. A maximum 32 entries can be configured.
To add a Trigger Port, press the Add button.
FIELD
DESCRIPTION
Select an Application or Custom
Application
A user can select a pre-configured application from the list or select the Custom Application option to
create custom application settings.
Trigger Port Start
Enter the starting trigger port number (when you select Custom Application). When an application is
selected the port range values are automatically entered.
Trigger Port End
Enter the ending trigger port number (when you select Custom Application). When an application is
selected the port range values are automatically entered.
Trigger Protocol
Options include TCP, UDP or TCP/UDP.
Open Port Start
Enter the starting open port number (when you select Custom Application). When an application is
selected the port range values are automatically entered.
Open Port End
Enter the ending open port number (when you select Custom Application). When an application is
selected the port range values are automatically entered.
Open Protocol
Options include TCP, UDP or TCP/UDP.

NetComm NF8AC Specifications

General

Brand	NetComm
Model	NF8AC
Category	Wireless Router
Language	English